Compound

• High performance polish
• Designed to remove compound swirl marks and other minor surface defects
• Good handling, easy cleanup
• Easy clean up
• Produces outstanding finish

Our 3M™ Perfect-It™ EX Ultrafine Machine Polish quickly and completely removes ultrafine swirl marks, even on difficult dark-colored vehicles. It stays wet longer, letting you use less material for a refined finish. Yet it also holds better on the pad for reduced sling and faster cleanup.

• Great-performing rubbing compound for removing P1200 or finer sand scratches
• Formulated for a broad range of user conditions without sticking or leaving residual film
• Works especially well on many newer, harder to buff clear coats
• Smooth-handling compound reduces powdering and leaves a refined finish on automotive or industrial paint

VOC content less than 17%.Used under the paint, as a chip-resistant protective layer on rocker panels, lower fenders, and other areas requiring stone chip protection. Must be applied over a 2K epoxy or urethane primer.

3M™ Metal Restorer and Polish restores the sparkle and shine on metals throughout boats. Our polish rejuvenates the beauty of metals by removing surface rust, oxidation, corrosion and tarnish. This easy-to-use paste brings back the original luster to make metals look new again.

3M™ Marine Clean and Shine Wax refreshes the beauty and appearance of boats with little effort. Simply spray on and wipe off. Our clean and shine wax transforms a boat covered with filmy residue into one that sparkles and shines again.

3M™ Super Duty Rubbing Compound is an aggressive compound that removes 1000 and finer sand scratches on all types of paint surfaces and gelcoats. Our compound remains wet on the job with little or no mess, maintains high rate of cut with constant pressure and buffs to high gloss with minimum effort. It can be used by hand or machine.

3M™ Finesse-it™ Polish – Finishing Material is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with 3M™ Finesse-it™ buffing

• Safe on all types of car pained surfaces
• Prevents fingerprint and dust
• Water-repellent effect
• Simply spray and wash off
• Acts as barrier for soil, oil and other stains

3M’s new Spray Wax instantly enhances your car’s gloss after washing, giving you the shine you desire.

• Economical liquid compound delivers a high rate of cut
• Compound removes 1000 and finer sand scratches
• Removes oxidation
• Formula remains wet for a long time and continues to cut with medium pressure
• Compound may be applied by hand or machine

3M™ Super Duty Rubbing Compound is an aggressive compound that

• Formulated for boat reconditioning of heavily oxidized surfaces and finishes
• Removes sand scratches on production gelcoat
• White color reduces the potential of staining light-colored boats
• Long working time requires less compound per application
• Recommended step prior to polishing and waxing

3M™

• Removes P1000 and finer scratches on gelcoat while offering a high gloss and fine finish (even on darker colored gelcoat), reducing time and expense
• Formula provides longer wet time for extended product life and easier cleanup
• Suitable for all gelcoat surfaces including marine, RV and industrial

Directions for Use

Compound

• An excellent final step for any process where wax finish is recommended
• Contains carnauba wax for a brilliant, pure wax finish
• Protects gelcoat, paint, fiberglass and metals from the elements
• Liquid wax formula is easy to apply and clean up
• Part of a complete range of Perfect-It™ products for gelcoat

• 3M’s fastest-cutting gelcoat formula for removing light to medium oxidation and scratches
• Removes swirl marks even on difficult dark-colored gelcoats
• Can be used to cut, polish and wax in one step, reducing time and expense
• Formula provides longer wet time for extended product life and easier cleanup
• Suitable for

NCS-30 ECF is a premium quality, non-metallic compound containing chemically inert fibers, and extreme pressure and anti-wear additives. These are blended into Jet-Lube's biodegradable base grease, which gives a wide temperature range, superior adhesion to wet steel surfaces, resistance to water wash off and the ability to withstand invert and high-pH muds.

3M™ Perfect-It™ Gelcoat Compound + Polish is designed to remove P1000 and finer sand scratches with a 3M™ compounding pad. It is designed to work over a broad range of climates. Its non-gritty formula works on all types of gelcoat surfaces and is especially designed for use on dark colored gelcoats, leaving an extremely fine finish with easy clean up.

APPLICATIONS
Premium lead-free API alternative for casing, tubing, and line pipe; contains no lead or zinc. Formulated for use in high temp steam injection service.

PRODUCT CHARACTERISTICS
Color: Dark Copper
Penetration: 310-340 (ASTM D 217)
Weight/Gallon: 10.

BIRKOSIT Description
BIRKOSIT Dichtungskitt® is a single-component, paste luting agent/sealing material for industrial use wherever conditions of temperature combined with pressure on smooth; plane sealing surfaces (butt joints) make extreme demands on the quality of the sealing compound.

Description

TF-15 is recommended for all critical tubular components from non-precision, loose and worn threads to high precision threads, particularly those subjected to impact or rough handling upon makeup. Formulated to aid in the make-up of large diameter casing.

Description

This new base grease offers the additional advantage of superior adhesion, improved EP and antiwear properties, resistance to water wash-off, and superior rust and corrosion protection in the presence of invert or high-pH muds.

Description

RISER BOLT LUBE “plates” metal surfaces, reducing high points and increases the load carrying area. It provides a low-friction shield to protect working parts, prevent galling, seizure, stick-slip and heat-freeze.

Description

The intended use of this compound is to prevent
seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures