Threadlocker

• High temperature, high strength
• Withstands temperatures up to 232 °C (450 °F)
• Heat and hand tools are required for disassembly

• Permanent locking and sealing of threaded fasteners
• Prevents loosening and leakage from shock and vibration
• Used for locking and sealing of large

TL-72 is color-coded red to assist in selection. TL-72 prevents vibration loosening and replaces special locking fasteners at reduced cost. It completely seals the entire engaged area, prevents corrosion and leakage.

TL-71 locks bolts and studs up to 1” in diameter, sealing against leakage and corrosion. It is chemically resistant to fuels, lubricants, and most industrial liquids and gases.

A fast setting anaerobic that wicks (by capillary action) into already assembled parts, reaching into the voids to set into a strong insoluble polymer.

TL-77 locks 1" and larger diamenters, sealing against leakage or corrosion. It is chmically resistant,resisting fuels, lubricants, and most industrial liquids and gases.

TL-42 does not run off or drip and does not migrate after assembly. Once applied, parts slip together easily, lubricated by the adhesive.

TL-22's anaerobic nature allows it to cure only when confined between metal parts. Low removal torque allows easy disassembly yet provides maximum vibration and shock resistance.

Specifically for use on all threaded joints or fasteners where an exceptionally strong and durable bond is required.

LOCTITE® 222 is designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

• Low viscosity, medium strength, high penetrability
• Wicking grade
• Excellent chemical resistance

• Prevent loosening and leakage from shock and vibration
• Used for locking and sealing pre-assembled threaded fasteners under M12
• Penetrate threads by capillary

• High strength, high viscosity
• Excellent chemical resistance
• Good lubricity
• Heat and hand tools are required for disassembly

• Prevent loosening and leakage from shock and vibration
• Used for permanent locking and sealing M24 – M36 threaded fasteners, prevent thread from

• High strength, medium to low viscosity
• Excellent chemical resistance
• Heat and hand tools are required for disassembly
• Good lubricity

• Prevent loosening and leakage from shock and vibration
• Used for permanent locking and sealing M16 – M26 (Ideal for under M22) threaded

• Low viscosity, high strength
• Heat and hand tools are required for disassembly
• Excellent chemical resistance
• Good lubricity

• Prevent loosening and leakage from shock and vibration
• Prevent rusty threads
• Used for locking and sealing threaded fasteners of M25 and

• Medium to high strength, thixotropic viscosity
• Excellent chemical resistance
• Good lubricity
• Easy removal, parts can be separated with hand tools

• Prevent loosening and leakage from shock and vibration
• Used for permanent locking and sealing M10 – M26 (Ideal for under M20)

• Medium strength, thixotropic
• Easy removal, parts can be separated with hand tools
• Good oil resistance, can be used on the surface with slight oil contamination
• Controlled lubricity for accurate clamp loads

• Prevent threaded fasteners from loosening and leakage
• Used for locking and