Porous Surface
AI-Powered Image SearchSelected tag
Tag Selection
- Porous Surface (5)
- Surface Primer (1)
- Bonding Agent (2)
- Adhesive Preparation (1)
- External Use (1)
- Gel (4)
- Gap Filling (14)
- Cyanoacrylate (13)
- Slow Curing (2)
- Mould Release Agent (3)
- Epoxy Release Agent (2)
- Demoulding Agent (2)
- Primer (8)
- Absorbent Surface (1)
- Surface Conditioner (2)
- Roof Preparation (1)
This liquid base binds to the Belzona 9311 to form a tough, flexible and elastic polymeric film which can tightly follow all roof contours.
More Details...
For porous and absorbent surfaces
For pre-treating absorbent and/or porous surfaces, like e.g. uncoated hardboards and plasterboards.
For pre-treating absorbent and/or porous surfaces, like e.g. uncoated hardboards and plasterboards.
- 25ml [10060610]
- 250ml [10023568]
for porous surfaces
P 500 is a release agent based on wax for epoxy resins and polyurethanes. It is particularly suitable for release processes from rough and/or porous surfaces.
- 150g [10026712]
- 0.5kg [10026171]
Cyanoacrylate Adhesive for special requirements | pasty (highly thixotropic) | very slow-curing = position correction
Contact Gel is pasty (highly thixotropic; 60000-90000 mPa•s) and cures very slowly. By using WEICON Activator Spray, the curing time can be reduced.
Contact Gel is pasty (highly thixotropic; 60000-90000 mPa•s) and cures very slowly. By using WEICON Activator Spray, the curing time can be reduced.
More Details...
For priming porous surfaces prior to the application of SAFE STEP® tapes, treads and tiles.
More Details...