Fast Curing

Cyanoacrylate Adhesive for special requirements | low viscosity | very fast curing | low odour and “blooming”

WEICON Contact VA 1408 has a low viscosity (20-40 mPa•s) and a reduced “blooming” effect. It cures quickly, is low in odour when processing and less susceptible to moisture effects after curing.

Cyanoacrylate Adhesive for rubber and plastics | medium viscosity | fast curing | NSF approval

WEICON Contact VA 1401 has medium viscosity (100-150 mPa•s) and cures quickly. It shows good results on fabric, paper, cardboard, cartons, foam rubber and largepored elastomers.

Cyanoacrylate adhesive for special requirements, hightemperature-resistant, fast-curing, medium viscosity, odourless

WEICON Contact VA 180 HT is a transparent cyanoacrylate adhesive for special requirements. It is high-temperature-resistant up to +180°C, fast-curing and odourless, and has medium viscosity.

Features:

• Fast curing at room temperature
• Non-toxic after cured
• Good flexibility
• High tensile strength
• High tearing strength
• Good abrasion, corrosion, aging and impact resistance

• Repairing and bonding of worn fabric joints
• Fill joint gaps
• Reinforce rubber

Features:

• Easy to use, fast installation
• Hardens to a tough, durable waterproof finish in minutes
• Excellent adhesion to iron, steel, stainless steel, titanium, fiberglass, aluminum, wood, ceramics, composites, acrylics, PVC, and most other plastics

• Makes permanent, waterproof field repairs to pipes, tanks,

Features:

• Fast-curing
• Stainless steel-filled two-component epoxy putty
• Suitable for quick and emergency repairs
• Cures in less than one hour
• Can be drilled, tapped, machined or painted

• Used for emergency and quick repairing of steel, iron, stainless steel etc.

Features:

• General purpose
• Medium viscosity
• Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength
• Fast cure
• Suitable for metal bonding

• Used for metal bonding
• Applicable to electronics, automobile, watercraft, precision

• BELZONA - 4521 was an elastomeric joint sealant, this product is designed for the effective sealing of construction and expansion joints. This low modulus material readily extends and compresses in sympathy with normal thermal movement of buildings and structures, ensuring minimal bond-line stress for maximum service life.

Description :

• A steel filled epoxy putty for general maintenance and repairs. Used for filling, rebuilding and bonding metal surfaces.