Metal Bonding

Permanently elastic | resistant to humidity

WEICON GMK 2410 is an adhesive based on poly­chloroprene (CR) for the high-strength, full-surface and flexible bonding of:

• rubber to rubber
• rubber to metal

​​​​​​
WEICON GMK 2410 also bonds cellular rubber, PE foam, leather, felt, insulating material, textiles, wood, and

plastic-filled | drinking water approval
WEICON Repair Stick Plastic was developed specially for the permanent repair of plastic components and composite materials with residual elasticity such as window and door frames, panelling and bumper bars.

non-corrosive | fast-curing | aluminium-filled
For the quick and non-corrosive repair and bonding of metal components. For the repair of cracks, holes and leaks in car bodies, gearboxes and tanks, window frames and profiles, and boats and models.

ideal for bonding metal parts |viscous | self-levelling |fast-curing

WEICON Easy-Mix Metal can be used on numerous materials such as plastic, fibre composites, ceramics, glass, stone, or wood. Suitable for bonds requiring larger tolerances to be bridged and for grouting works.

high temperature resistance | high thermal conductivity | long pot life

WEICON Easy-Mix HT 250 is a 2-component adhesive based on epoxy resin with a high temperature resistance up to +200 °C; briefly up to +250 °C.

The 2-C epoxy resin system shows particularly high adhesion to metals and fibreglass.

high-temperature-resistant | non-drip | shock- and impact-resistant | UL-tested

WEICON Easy-Mix HT 180 is a 2-component adhesive based on epoxy resin with high temperature resistance up to +180 °C (+356 °F); short-term up to +230 °C (+446 °F).

The adhesive is highly viscous and stable which also makes it suitable for vertical applications.

FREE DELIVERY TO WEST MALAYSIA Description

Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds.

Features:

• Pre-mixed steel-based formulation
• Bonds to dry surfaces
• Bonds to metals, concrete and plastics
• Cures at room temperature
• Can be drilled, tapped, machined or painted
• Non-toxic and solvent-free

• Steel epoxy is used for patching and repairing of cracks, holes, gouges, and

Features:

• General purpose
• Medium viscosity
• Does not contain solvent, but highly polymerize with moisture in the air for a fast cure and high bond strength
• Fast cure
• Suitable for metal bonding

• Used for metal bonding
• Applicable to electronics, automobile, watercraft, precision

• BELZONA-1391 Ceramic HT Metal was combining a unique blend of inorganic erosion/corrosion resistant reinforcing agents with a radically new, densely cross-linked heat polymer, this product makes protection against erosion/corrosion in high temperature environments a reality.

• HYLO®GRIP HY6148 fast curing single part, anaerobic, retaining adhesive for cylindrical parts and is high strength, and low viscosity.

• HYLO®GRIP HY5177 medium strength pipe sealant for metal threads. It is a medium strength, high viscosity adhesive suitable for bonding all threaded metal assemblies. It is particularly useful for the fast sealing of threaded joints in pipe-work.

Description :

• HYLO®GRIP HY5174 form in place (FIP) single component anaerobic curing flexible sealant, which cures in the joint to form a flexible plastic seal. The product is designed to replace traditional solid gaskets. The thixotropic properties of HYLO®GRIP HY5174 prevent migration of the sealant before or during curing.

• HYLO®GRIP HY2170 is a fast curing, single part anaerobic thread-locker. It is a very high strength, low viscosity adhesive suitable for bonding all threaded metal assemblies. The low viscosity allows the product to penetrate close fitting assemblies.

• HYLO®GRIP HY2143 is a fast curing, single part anaerobic thread-locker. It is a medium strength,medium viscosity adhesive suitable for bonding and sealing all threaded metal assemblies.