Extreme Pressure

OG-H is a NLGI Grade 3 product suitable for use both indoors and outdoors under extreme weather conditions. OG-H replaces ordinary residual type tarry materials and is easier to apply; requiring no heating or other preparation.

TEMP-GUARD contains no organometallic additives that would decompose at elevated temperatures thereby reducing the lubricative characteristics of the product.

JET-PLEX-EP has a smooth texture with a heavy body consistency, but provides good pumpability in both hot and cold operating temperatures. It also has excellent resistance to water and water washout problems. Oil separation is minimal even under extreme pressure.

EP BEARING GREASE is water resistant, highly tenacious and has excellent resistance to the effects of salt spray, heat, water, oxidation, high loads and other adverse conditions common to industrial usage.

Description

ALCO-EP ECF WW contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease.

Description

ALCO-EP ECF contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease.

POWER-KOTE exceeds industry performance and environmental standards and is highly recommended for large-diameter drill collars in the most extreme drilling conditions, including geothermal wells, high angle holes, extended reach, sidetrack reentry, and horizontal

NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Especially effective for invert or high-pH muds.

High strength polymers, graphite, and other naturally-occurring, extreme-pressure, and anti-wear additives lock together under pressure to resist galling, seizure, and downhole makeup.

This new base grease offers the additional advantage of superior adhesion, improved EP and antiwear properties, resistance to water wash-off, and superior rust and corrosion protection in the presence of invert or high-pH muds.

AEROSPEC® 400 provides exceptional corrosion protection and extreme pressure performance.

• MOLYSLIP Soluble Cutting Oil is a proprietary base, blended with low-gravity, solvent- refined neutral oils and is completely free from cresylic acid, phenols and cresols and the alkalinity is controlled at pH7. The product is practically odourless and is kind to the skin and includes an effective biocide.

• MOLYSLIP MEP Soluble Cutting Oil Supplement contains high proportions of emulsifying agents, EP anti-weld additives and a stable soluble molybdenum compound. The stability of soluble oil dilutions varies greatly and it has been found that oils containing higher proportions of emulsifiers give the best results.

• MOLYSLIP MCC compound has been developed as a highly efficient lubricant for metalworking operations. It is particularly effective with more difficult metals and alloys such as titanium, stainless steel and nimonics.

• MOLYSLIP EHT GREASE is a non-melt bentone-based grease containing molybdenum disulphide and graphite.
• Designed for use in high temperature conditions up to 250°C