Water Resistant

Product Description Molykote® 33 Medium Extreme Low Temperature Grease
This is a grease to be used under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds.

WIRE ROPE Dressing
High performance semi-fluid wire rope dressing grease providing excellent corrosion protection in multiple environments including saltwater and under water.

This is  use to lubricate ball bearings operating under light to moderate loads.
Composition : Lithium soap , Phenylmethyl silicone oil .
Features & Benefits : Resistance to oxidation, moisture and corrosive atmospheres , Inertness , Good shear stability .

Features:

• Oxidisation resistance
• Non-corrosive
• Water washout resistance
• Good lubricity
• Chemically inactive

• Suited for low temperature lubrication, and provides resistance to oxidization and washout
• Lubricant for dynamic pneumatic o-rings
• As a seal between rubber and

Description

Pumpable with a high pressure lubricator, EZY-PAK #125 will conform to any shape, preventing leaks and/or foreign materials from entering the valve cavity.

Description

Formulated from synthetic fluid and fibers plus inert fillers and a high percentage of ground PTFE particles for performance over a wide temperature range.

Description
RUN-N-SEAL contains a large volume of solids enhanced by a higher concentration of large-sized particles.

Description

MARINE WIRE ROPE & HAWSER GREASE maintains and extends the life and performance of wire rope by providing a

Description

MARINE-MP is water resistant, highly tenacious and has excellent resistance to the effects of salt spray, heat, water, oxidation and other adverse conditions common to marine usage.

Description

Contained MoS2 is chemically stable and is attacked by few strong reagents. If the grease vehicle should be squeezed out, disrupting normal hydrodynamic lubrication, the moly-disulphide remains to protect working surfaces.

Description

The low volatility and inert properties allow it to be used on a wide range of elastomers and plastics.

Description

CB-2 is an all-weather product that lubricates efficiently at temperatures as low as 0°F (-18°C) and as high 300°F (149°C. It is highly adhesive to metal, has good mechanical stability and is resistant to heat, water, oxidation, and heavy loading.

Designed for:
Excellent for rack/pinion grease cups, drive shaft idler arm and ball joints. Specifically formulated to protect your equipment from premature damages that can occur from dirt, dust, and sediments.

Description

Designed for extreme cold weather environments where fluid film strength is important and grease consistency remains the same.

Description

The aluminum complex thickener utilized in KILN GREASE HT was selected for its excellent stability, temperature and water resistance.

Description

ALCO-EP provides superior wear protection against extreme pressure and is highly water resistant. It has excellent load-carrying ability. For marine environments where high humidity and moisture are constantly present.

Description

ALCO-EP ECF WW contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease.

Description

ALCO-EP ECF contains polymer additives, further enhancing the inherent water resistance of a calcium complex- based grease.

Description

V-2 Multi-Purpose Thread Sealant is a non-toxic, environmentally safe, high performance thread sealant which contains no lead or metals. V-2 is easily applied and is brushable at low temperatures.

Description

ENVIRO-GUARD’s advanced base grease is a carefully selected balance of synthetic and vegetable oils with our Extreme base grease thickener technology coupled with innovative solid

  Description

Z-50, and Z-60 are manufactured with JETLUBE’s unique grease compounded from custom refined, low sulfur oil. All contain special additives to reduce the plating and buildup of metallic zinc encountered with other zinc compounds.

Description

WHITE LITHIUM GREASE is excellent for all metal-to-metal lubrication and is the preferred lubricant for use in the plant, shop, home, auto and marine.

Features:

• Protection of entire wire through penetration into wire core
• High melting point, for use in extreme climates and temperatures well below freezing
• Chemically active for ultimate rust protection
• Ensures excellent adhesion to the wire
• Protective layer prevents penetration of moisture, flexibility without

Features:

• High pressure resistance
• High wear protection
• Extremely adhesive
• Resistance against water

• Emergency lubrication
• Used for initial lubrication of chains with hollow pins equipped with grease nipples
• Also used for gear drives and open gears, sliding bearings operating at