Intended Uses
Max Cor CF is a high solids two component anti-corrosive, chromate-free epoxy primer for aluminum and steel with excellent chemical and solvent resistance. Max Cor CF is based on 'Controlled Fusion' (CF) technology, a unique chemical system that allows extended re-coat times, removes the need for sanding prior to applying the next coat and also gives excellent substrate adhesion.

The technology eliminates the requirement for high hazard chemicals and ensures a tightly fused intercoat layer between the CF-based coating and the next applied coat. For above the waterline only.

Specification Data

Volume Solids	56%
Specific Gravity	1.20
Available Packs	Base available in a 1 gallon pack, converter in a ½ gallon pack. Typical Shelf Life - 2 years
Base	OR4330
Converter	OR3330
Reducer	Do not thin/reduce
Equipment Cleaning	T0006, T0176 (NA only), Acetone or M.E.K.

Application
Application equipment and parameters are given as a guide. Actual equipment choices will vary according to application conditions, equipment condition and other factors. Testing on a non-critical area should be carried out prior to full-scale application. 

Spray only. Apply one smooth wet coat. Substrate may be visible through dry film. Do not exceed maximum recommended dry film thickness.