.jpg)
KSJ Global Sdn Bhd
22, Jalan Tanjong 2,
Taman Desa Cemerlang,
81800 Ulu Tiram,
Johor, Malaysia.
+607-862 8625
+607-862 8725
MOLYKOTE® P-37
| Previous | 22 / 60 | Next |
Description: Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine.
Applications: Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat-resistant steels, e.g. those made from nickel-based alloys. Used successfully for the bolted joints of gas and steam turbines and in power stations.
Features: Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant); Can be used at temperatures up to +1400°C; Coefficient of friction in the
range of oiled bolts; Low scatter of pre-stressing forces on tightening; Avoidance of stress cracks and solder brittleness; Enables non-destructive loosening of bolted joints even after long use at high temperatures.
Composition: Solid lubricants in practically sulphur free, partly synthetic oil; Thickener; Adhesion improver.
Temperature Range: From -40 °C to +1400 °C
Applications: Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat-resistant steels, e.g. those made from nickel-based alloys. Used successfully for the bolted joints of gas and steam turbines and in power stations.
Features: Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant); Can be used at temperatures up to +1400°C; Coefficient of friction in the
range of oiled bolts; Low scatter of pre-stressing forces on tightening; Avoidance of stress cracks and solder brittleness; Enables non-destructive loosening of bolted joints even after long use at high temperatures.
Composition: Solid lubricants in practically sulphur free, partly synthetic oil; Thickener; Adhesion improver.
Temperature Range: From -40 °C to +1400 °C