KSJ Global Sdn Bhd
22, Jalan Tanjong 2,
Taman Desa Cemerlang,
81800 Ulu Tiram,
Johor, Malaysia.
1700-818831
1700-815827

ALUMINIUM PLATE/BAR/ROD/PIPE/ANGEL/SECTION

Previous 1 / 6 Next

ALUMINIUM PLATE/BAR/ROD/PIPE/ANGEL/SECTION Other Steel Product


Specifications:
  • 6061-T6
  • 5052
  • 5083
  • 7075
  • 1100

 

Typical Chemical Composition (6061-T6):

  • Cu: 0.15-0.40%
  • Mn: 0.0-0.15%
  • Fe: 0.0-0.7%
  • Mg: 0.80-1.20%
  • Si: 0.40-0.80%
  • Zn: 0.0-0.25%
  • Ti: 0.0-0.15%
  • Cr: 0.04-0.35%
  • Al: Remaining %

 

Typical Mechanical Properties (6061-T6):

  • Tensile Strength: 310 MPa
  • Elongation: 12%
  • Proof Stress: 270 MPa
  • Shear Strength: 190 MPa
  • Hardness Vickers: 100 HV

 

Applications (6061-T6):

  • Rail coaches
  • Truck frames
  • Ship building
  • Bridges and military bridges
  • Aerospace applications including helicopter rotor skins
  • Tube
  • Pylons and towers
  • Transport
  • Boilermaking
  • Motorboats
  • Rivets

 

Typical Chemical Composition (5052):

  • Al: 95.7-97.7%
  • Cr: 0.15-0.35%
  • Cu: 0.1% max
  • Fe: 0.4% max
  • Mg: 2.2-2.8%
  • Mn: 0.1% max
  • Si: 0.25% max
  • Zn: 0.1% max

 

Typical Mechanical Properties (5052):

  • Tensile Strength: 193 MPa
  • Yield Strength: 89.6 MPa
  • Hardness: 47 HB
  • Elongation: 25%
  • Modulus of Elasticity: 70.3 GPa
  • Machinability: 30%

 

Applications (5052):

  • Architecture
  • General sheet metal work
  • Heat exchangers

 

Typical Chemical Composition (5083):

  • Cr: 0.05-0.25%
  • Cu: 0.40-1.00%
  • Fe: 0.40% max
  • Mg: 4.00-4.90%
  • Mn: 0.10% max
  • Si: 0.40% max
  • Zn: 0.25% max
  • Ti: 0.15% max
  • Al: Remaining %

 

Typical Mechanical Properties (5083):

  • Tensile Strength: 330 MPa
  • Hardness: 95 HB
  • Elongation: 17%
  • Modulus of Elasticity: 72 MPa
  • Proof Strength: 240 MPa
  • Shear Strength: 185 MPa

 

Applications (5083):

  • Known for exceptional performance in extreme environments
  • Used in rail cars
  • Vehicle bodies
  • Tip truck bodies
  • Mine skips and cages
  • Pressure vessels
  • Used in shipbuilding due to its high resistance to attack by seawater and chemical environments
  • Alloy 5083 also retains exceptional strength after welding, having the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65degC

 

Typical Chemical Composition (7075):

  • Al: 87.1-91.4%
  • Cr: 0.18-0.28%
  • Cu: 1.2-2%
  • Fe: 0.5% max
  • Mg: 2.1-2.9%
  • Mn: 0.3% max
  • Si: 0.4% max
  • Ti: 0.2% max
  • Zn: 5.1-6.1%

 

Typical Mechanical Properties (7075):

  • Tensile Strength: 572 MPa
  • Yield Strength: 503 MPa
  • Hardness: 150 HB
  • Elongation: 11%
  • Modulus of Elasticity: 71.7 GPa
  • Machinability: 70%

 

Applications (7075):

  • Used in transport applications, including marine, automotive and aviation, due to their high strength-to-density ratio
  • Rock climbing equipment
  • Bicycle components
  • Inlineskating-frames
  • Hang glider airframes

 

Typical Chemical Composition (1100):

  • Al: 99.0%
  • Cu: 0.12%

 

Typical Mechanical Properties (1100):

  • Modulus of Elasticity: 70-80 GPa

 

Applications (1100):

  • Widely used in fin stock
  • Heat exchanger fins
  • Spun hollowware
  • Dials and name plates
  • Decorative parts
  • Giftware
  • Cooking utensils
  • Rivets
  • Reflectors
  • Sheet metal work

 

General Aluminium Applications:

  • Greyish-white in colour, it is malleable, ductile and conductive to heat and electricity
  • This film of oxide can be further thickened by a process known as the anodizing
  • Welding can be made possible
  • Anodized or spray coating possible to achieve different architectural effects
  • I-beams and special aluminium profiles are also available
  • A thin inert film of oxide products the metal surface from further attack, thus giving the metal a form of resistance to corrosion
  • With its non-corrosive and good mechanical properties, each grade of Aluminium has a high range of applications
  • Aluminium also possesses very high malleability, enabling it to be produced into a very thin foil.

 

Profiles Available:

  • Round Bar / Rod
  • Flat Bar
  • Square Bar
  • Angle Bar
  • Hollow Section
  • Pipe / Tube
  • Wire
  • Shim / Foil
  • Sheet / Plate
  • Perforated (Sheet)
  • “T”, “L”, “U”, “I” Bar
  • Conveyor System (Racking)
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version